They has been mixing with a V-type machine for many years, and the results are not good, even if the mixing time is increased to a maximum of 24 hours, the results are still not ideal. The main reason is that light powder (such as toner) and heavy powder cannot be mixed sufficiently. Split internal particle bonding can not be canceled, etc., he has been looking for an upgraded product to solve these problems, so he has been looking for a new type of mixer, both advanced mixing concept, and good practical operation, so see our equipment in the brochure, can solve the problems he encountered, prompting him to come and take a look! And in our mixing workshop did a mixed molybdenum experiment, carefully checked the working principle of the equipment, the operating status and the mixing efficiency, the outer barrel rotated and added the rotation of the double blades, only five hours of mixing was over, the test results of the experiment, the uniformity of mixing is quite high, fully meet the requirements of use, only one time saved more than ten hours, for the results of the experiment Su is very satisfied with our mixer, We believe that the design concept of our mixer is a revolutionary change in the mixing equipment industry. Originally, I had the mentality of buying a mixer to try, and after seeing the demonstration of our mixer, we signed a purchase contract on the same day, and purchased 1 JHX-600 mixer, 1 JHX-600Z mixer, and 2 JHX-50 mixers, a total of four mixers.